Ürün arama

Açıklama

Planet PL BSP 360 Endüstriyel PoE Switch

Özellikler

Endüstriyel Tip Yenilenebilir Enerjiden Beslenen Yönetilebilir PoE+ Switch
5-Port 10/100/1000Base-TX RJ-45
Port 1 to Port 5, bridge mod
Port 5, gateway mod
4-Port IEEE 802.3at/af PoE+ injector
30.8 watt
2-Port 1000BASE-SX/LX/BX SFP/mini-GBIC yuva
Port-9 ve Port-10, 100Base-FX SFP uyumlu
1 x RJ45 port (management)
1 x USB port (backup)
IP30, -10~60 Derece
PoE Power Usage Display

Teknik Özellikler

Hardware Specifications
Copper Ports	LAN: 5 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port 1 to Port 5, bridge mode)
Copper Ports	WAN: 1 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port 5, gateway mode)
PoE Injector Port	4 ports with 802.3af/802.3at PoE injector function (Port 1 to Port 4)
USB	1 USB Type A female for setting backup
Power Output	4 PoE out 51VDC; max. 30 watts per PoE port
	2 DC out 24@ 1A maximum (four-pin terminal block)
	* The voltage of DC out is based on the battery.
Switch Architecture	Store-and-Forward
Switch Fabric	10Gbps/non-blocking
Switch Throughput@64 bytes	5.95Mpps@64 bytes
MAC Address Table	8K entries
Shared Data Buffer	512Kbit
Flow Control	IEEE 802.3x pause frame for full-duplex
Flow Control	Back pressure for half-duplex
Reset Button	< 5 sec: System reboot
Reset Button	> 5 sec: Factory default
LED	3 LEDs for System and Power:
	Green: Power
	Green: Fault
	Green: System
	4 LEDs for PoE Copper Ports (Port 1~Port 4):
	Green: LNK/ACT
	Orange: PoE-in-use
	1 LED for 10/100/1000T Copper Port (Port 5):
	Green: LNK/ACT
	3 LEDs for PoE Power Usage (W)
	Green: 50, 100 and 120W
Connector	Removable 6-pin terminal block
Connector	Pin 1/2 for PV panel; Pin 3/4 for alarm; Pin 5/6 for battery
Alarm	1 Digital Output (DO):
	Level 0: -24V~2.1V (±0.1V)
	Level 1: 2.1V~24V (±0.1V)
	Open collector to 24V DC, 100mA max.
Power Requirements	PV in: 24~45V DC
Power Requirements	Battery in/out: 24V DC
Power Consumption/ Dissipation	5.04 watts, 17.1BTU (Standby without PoE function)
	6.96 watts, 23.7 BTU (Full loading without PoE function)
	135.36 watts, 461.5 BTU (Full loading with PoE function)
Dimensions (W x D x H)	84 x 107 x 152 mm
Weight	1026g
ESD Protection	6KV DC
Enclosure	IP30 aluminum case
Installation	DIN-rail kit and wall-mount ear
Power over Ethernet
PoE Standard	IEEE 802.3af/802.3at Power over Ethernet PSE
PoE Power Supply Type	End-span
PoE Power Output	Per port 51V DC, 275mA. Max. 15.4 watts (IEEE 802.3af)
PoE Power Output	Per port 51V DC, 535mA. Max. 30 watts (IEEE 802.3at)
Power Pin Assignment	1/2 (+), 3/6 (-)
PoE Power Budget	120 watts (PoE consumption + DC out and depending on power input)
Max. Number of Class 2 PDs	4
Max. Number of Class 3 PDs	4
Max. Number of Class 4 PDs	4
Electrical Characteristics
System Voltage Rating	24V DC
Maximum Charging Current	6A
Max. Solar Array VOC	60V DC
Max. Operating Voltage	45V DC
Total Current Consumption	While operating -32mA
Total Current Consumption	At idle -11mA
High Temperature Shutdown	100 degrees C disconnect solar and load
High Temperature Shutdown	80 degrees C reconnect solar and load
Battery Charging Characteristics
Charge Algorithm	Bulk charge (constant current), Absorption charge (constant voltage) and Floating charge. Absorption and Floating charge with PWM protection.
Maximum Output Current	6A
Nickel-cadmium Battery	± 40 mV/degrees Celsius for NiCad type batteries; charge cut-off @ 55 degrees C
Nickel-cadmium Battery	(Temperature compensation baseline@ 25 degrees C)
Lead Acid Battery (Default Setting)	± 60 mV/degrees Celsius for lead acid type batteries; charge cut-off @ 55 degrees C
Lead Acid Battery (Default Setting)	(Temperature compensation baseline@ 25 degrees C)
Float Charge Voltage	DC 27.2V (26.0~30.0V)
Absorption Charge Voltage	DC 29.2V (28.0~32.0V)
LVD (Low Voltage Disconnection)	DC 22.2V (21.0~25.0V)
LVR (Low Voltage Reconnection)	DC 24.8V (23.0~27.0V)
Router Features
Internet Connection Type	Shares data and Internet access with users, supporting the following internet accesses:
	PPPoE
	Dynamic IP
	Static IP
	PPTP
	L2TP
Firewall	NAT firewall with SPI (Stateful Packet Inspection)
	Built-in NAT server supporting Port Forwarding, and DMZ
	Built-in firewall with IP address/MAC address/Port/ URL filtering
	Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter, DoS protection
Routing Protocol	Static/Dynamic (RIP1 and 2) routing
VPN Pass-through	PPTP, L2TP, IPSec, IPv6
LAN	Built-in DHCP server supporting static IP address distribution
	Supports UPnP, Dynamic DNS
	Supports IGMP Proxy
	Supports 802.1d STP (Spanning Tree)
	IP/MAC-based bandwidth control
Management
Management Interface	Setup of system/management functions
	Web firmware upgrade
	SNMP trap for alarm notification of events
PoE Management	Power limit by consumption and allocation
	PoE admin mode
	Per port power schedule
	Per port power enable/disable
	Power feeding priority
	Current per port usage and status
	Total power consumption
	PD alive check
	Scheduled power recycling
Battery Management	Battery current usage and status
	Battery capacity statistics
	Low Voltage Cut-Off Protection
Standards Conformance
Regulatory Compliance	FCC Part 15 Class A, CE
Standards Compliance	IEEE 802.3 10BASE-T Ethernet
	IEEE 802.3u 100BASE-TX Fast Ethernet
	IEEE 802.3ab 1000BASE-T Gigabit Ethernet
	IEEE 802.3x Flow Control and Back Pressure
	IEEE 802.1D Spanning Tree Protocol
	IEEE 802.3af Power over Ethernet
	IEEE 802.3at Power over Ethernet Plus
	RFC 768: UDP
	RFC 791: IP
	RFC 2068 HTTP
	RFC 1157: SNMP v1
	RFC 1902: SNMP v2c
	RFC 5424: Syslog
Environment
Operating	Temperature: -10 ~ 60 degrees C
Operating	Relative Humidity: 5 ~ 95% (non-condensing)
Storage	Temperature: -10 ~ 70 degrees C
Storage	Relative Humidity: 5 ~ 95% (non-condensing)