Ürün arama
Açıklama
Planet IPOE 171S Endüstriyel PoE Splitter
Özellikler
Interface
- 2 RJ45 interfaces
- 1-port Data + Power input
- 1-port Data output
- 2 DC output (4-pin terminal block)
- 1 DC 12V/24V DIP switch
- Complies with ultra Power over Ethernet end-span and mid-span PD
- Complies with IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD
- Supports PoE input power up to 110 watts
- Splits the 50~56V DC power over RJ45 Ethernet cable into DC 12V/24V output
- Remote power feeding up to 100 meters
Hardware
- IP30 metal case protection
- DIN rail and wall mount design
- -40 to 75 degrees C operating temperature
Teknik Özellikler
| Hardware Specifications | |
| Interface | PoE Input Port: |
| 1 x 10/100/1000 BASE-T RJ45 | |
| “PoE (Data + Power) In” | |
| Data Output Port: | |
| 1 x 10/100/1000 BASE-T RJ45 | |
| “Data Out” | |
| DC Out Plug Connector: | |
| 1 removable 4-pin terminal block | |
| DIP-Switch: | |
| 12V DC /24V DC output voltage | |
| LED Indicator | Power Ready: Green |
| 802.3at PoE+ In: Green | |
| Ultra PoE or 802.3bt PoE in: Green | |
| DC 12V: Orange | |
| DC 24V: Green | |
| Network Cable | Ultra PoE (60W/75W/95W): 4-pair UTP Cat5e, 6, up to 100m (328ft) |
| 802.3at PoE+: 2-pair UTP Cat. 3, 4, 5, up to 100m (328ft) | |
| Data Rate | 10/100/1000Mbps |
| Dimensions (W x D x H) | 32 x 87 x 132 mm |
| Weight | 425g |
| Installation | DIN rail/wall mountable |
| Enclosure | IP30 metal case |
| Power Requirements | 50 ~ 56V DC PoE |
| Power Output (at 56V DC Input) | 110-watt PoE input: |
| 12V DC, 8A (max.) | |
| 24V DC, 4A (max.) | |
| 75-watt PoE input: | |
| 12V DC, 4.5A (max.) | |
| 24V DC, 2.3A (max.) | |
| Power Consumption | System on with PoE input: |
| 3.7 watts | |
| Ethernet full loading without DC output: | |
| 3.7 watts | |
| Full loading with maximum 12V DC, 4A output: | |
| 60.2 watts | |
| Full loading with maximum 12V DC, 8A output: | |
| 110 watts (110-watt PoE in) | |
| Power over Ethernet | |
| PoE Standard | 802.3bt Type 3/Type 4 Power over Ethernet, |
| 4-pair 802.3at PoE+ and Cisco UPOE compliant with voltage within 50V-56V DC | |
| Power Output | DC 12V/24V by DIP switch control |
| PoE Power Supply Type | end-span + mid-span |
| end-span | |
| mid-span | |
| Power Pin Assignment | 1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-) or 1/2(-), 3/6(+); 4/5(+), 7/8(-) |
| Standards Conformance | |
| Standards Compliance | IEEE 802.3 10BASE-T Ethernet |
| IEEE 802.3u 100BASE-TX Fast Ethernet | |
| IEEE 802.3ab 1000BASE-T Gigabit Ethernet | |
| IEEE 802.3at Power over Ethernet Plus | |
| IEEE 802.3af Power over Ethernet | |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Environment | |
| Operating Temperature | -40~ 75 degrees C |
| Storage Temperature | -40~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
