Ürün arama
Açıklama
Planet PL IGS 5225 4UP1T2S Endüstriyel PoE Switch
Özellikler
- 4 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with Ultra PoE Injector
- 1 10/100/1000BASE-T Gigabit Ethernet RJ45 ports ports
- 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection
- One RJ45 console interface for basic management and set
- IP30
- -40~75 Derece
- Per port 60 watt
Teknik Özellikler
| Hardware Specifications | |
| Copper Ports | 5 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
| SFP/mini-GBIC Slots | 2 1000BASE-SX/LX/BX SFP interfaces (Port-6 to Port-7) |
| Compatible with 100BASE-FX SFP | |
| PoE Injector Port | 4 ports with Ultra PoE/802.3at/af PoE injector function with Port-1 to Port-4 |
| Console | 1 x RJ45-to-RS232 serial port (115200, 8, N, 1) |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 14Gbps/non-blocking |
| Throughput (packet per second) | 10.42Mpps@ 64 bytes packet |
| Address Table | 8K entries, automatic source address learning and aging |
| Shared Data Buffer | 4Mbits |
| Flow Control | IEEE 802.3x pause frame for full-duplex |
| Back pressure for half-duplex | |
| Jumbo Frame | 9Kbytes |
| Reset Button | < 5 sec: System reboot |
| > 5 sec: Factory default | |
| ESD Protection | 6KV DC |
| Enclosure | IP30 aluminum case |
| Installation | DIN rail kit and wall-mount kit |
| Connector | Removable 6-pin terminal block for power input |
| Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2 | |
| Removable 6-pin terminal block for DI/DO interface | |
| Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND | |
| Alarm | One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC |
| DI/DO | 2 Digital Input (DI): |
| Level 0: -24V~2.1V (±0.1V) | |
| Level 1: 2.1V~24V (±0.1V) | |
| Input load to 24V DC, 10mA max. | |
| 2 Digital Output (DO): | |
| Open collector to 24V DC, 100mA max. | |
| LED Indicator | System: |
| Power 1 (Green) | |
| Power 2 (Green) | |
| Fault Alarm ( Red ) | |
| Ring (Green) | |
| Ring Owner (Green) | |
| DIDO ( Red ) | |
| Per 10/100/1000T RJ45 Ports: | |
| 100 LNK/ACT (Orange) | |
| 1000 LNK/ACT (Green) | |
| Per SFP Interface: | |
| 100 LNK/ACT (Orange) | |
| 1000 LNK/ACT (Green) | |
| Per PoE Port: | |
| Ultra 60W PoE-in-use x 1 (Green) | |
| 802.3at/af PoE-in-use x1 (Orange) | |
| PoE Usage: | |
| 60W, 120W, 180W, 240W (Green) | |
| Dimensions (W x D x H) | 72 x 107 x 152 mm |
| Weight | 1050g |
| Power Requirements | Dual 48~56V DC (>52V DC for PoE+ output recommended) |
| Power Consumption | Max. 6.6 watts/22.52BTU (Power on without any connection) |
| Max. 282 watts/962.22BTU (Full loading with Ultra PoE function) | |
| Power Over Ethernet | |
| PoE Standard | IEEE 802.3af/802.3at/Ultra PoE PSE |
| PoE Power Supply Type | End-span/Mid-span/UPoE |
| PoE Power Output | IEEE 802.3af Standard |
| - Per port 48V~52V DC (depending on the power supply), max. 15.4 watts | |
| IEEE 802.3at Standard | |
| - Per port 52V~56V DC (depending on the power supply), max. 36 watts | |
| Ultra PoE | |
| - Per port 48V~56V DC (depending on the power supply), max. 72 watts | |
| Power Pin Assignment | End-span: 1/2(-), 3/6(+) |
| Mid-span: 4/5(+), 7/8(-) | |
| UPoE: 1/2(-), 3/6(+),4/5(+), 7/8(-) | |
| PoE Power Budget | 240W maximum (depending on power input) |
| PoE Ability PD @ 15 watts | 4 units |
| PoE Ability PD @ 30 watts | 4 units |
| PoE Ability PD @ 60 watts | 4 units |
| Layer 2 Function | |
| Basic Management Interfaces | Console; Telnet; Web browser; SNMP v1, v2c |
| Secure Management Interfaces | SSH, SSL, SNMP v3 |
| Port Configuration | Port disable/enable |
| Auto-negotiation 10/100/1000Mbps full and half duplex mode selection | |
| Flow control disable/enable | |
| Port Status | Display each port’s speed duplex mode, link status, flow control status, |
| auto negotiation status, trunk status | |
| Port Mirroring | TX/RX/both |
| 1 to 1 monitor | |
| VLAN | 802.1Q tagged based VLAN, up to 255 VLAN groups |
| Q-in-Q tunneling | |
| Private VLAN Edge (PVE) | |
| MAC-based VLAN | |
| Protocol-based VLAN | |
| Voice VLAN | |
| MVR (Multicast VLAN Registration) | |
| Up to 255 VLAN groups, out of 4095 VLAN IDs | |
| Link Aggregation | IEEE 802.3ad LACP/static trunk |
| Supports 3 trunk groups with 3 ports per trunk group | |
| QoS | Traffic classification based, strict priority and WRR |
| 8-level priority for switching | |
| - Port number | |
| - 802.1p priority | |
| - 802.1Q VLAN tag | |
| - DSCP/TOS field in IP packet | |
| IGMP Snooping | IGMP (v1/v2/v3) snooping, up to 255 multicast groups |
| IGMP querier mode support | |
| MLD Snooping | MLD (v1/v2) snooping, up to 255 multicast groups |
| MLD querier mode support | |
| Access Control List | IP-based ACL/MAC-based ACL |
| Up to 123 entries | |
| Bandwidth Control | Per port bandwidth control |
| Ingress: 500Kb~1000Mbps | |
| Egress: 500Kb~1000Mbps | |
| SNMP MIBs | RFC 1213 MIB-II |
| RFC 1493 Bridge MIB | |
| RFC 1643 Ethernet MIB | |
| RFC 2863 Interface MIB | |
| RFC 2665 Ether-Like MIB | |
| RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) | |
| RFC 2737 Entity MIB | |
| RFC 2618 RADIUS Client MIB | |
| RFC 2933 IGMP-STD-MIB | |
| RFC 3411 SNMP-Frameworks-MIB | |
| IEEE 802.1X PAE | |
| LLDP | |
| MAU-MIB | |
| Layer 3 Function | |
| IP Interfaces | Max. 8 VLAN interfaces |
| Routing Table | Max. 32 routing entries |
| Routing Protocols | IPv4 software static routing |
| IPv6 software static routing | |
| Standards Conformance | |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC60068-2-32 (free fall) |
| IEC60068-2-27 (shock) | |
| IEC60068-2-6 (vibration) | |
| Standards Compliance | IEEE 802.3 10BASE-T |
| IEEE 802.3u 100BASE-TX/100BASE-FX | |
| IEEE 802.3z Gigabit SX/LX | |
| IEEE 802.3ab Gigabit 1000T | |
| IEEE 802.3x flow control and back pressure | |
| IEEE 802.3ad port trunk with LACP | |
| IEEE 802.1D Spanning Tree Protocol | |
| IEEE 802.1w Rapid Spanning Tree Protocol | |
| IEEE 802.1s Multiple Spanning Tree Protocol | |
| IEEE 802.1p Class of Service | |
| IEEE 802.1Q VLAN tagging | |
| IEEE 802.1X Port Authentication Network Control | |
| IEEE 802.1ab LLDP | |
| IEEE 802.3af Power over Ethernet | |
| IEEE 802.3at Power over Ethernet Plus | |
| IEEE 802.3bt Power over Ethernet ready | |
| RFC 768 UDP | |
| RFC 793 TFTP | |
| RFC 791 IP | |
| RFC 792 ICMP | |
| RFC 2068 HTTP | |
| RFC 1112 IGMP v1 | |
| RFC 2236 IGMP v2 | |
| Environment | |
| Operating Temperature | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
Planet PL IGS 5225 4UP1T2S Endüstriyel PoE Switch PDF Dosyası4.33 MB
Teknik Kısa
PoE : PoE Plus
Port Hızı : 1 GBit
Yönetilebilirlik : Yönetilebilir Layer 2 Plus
PoE Güç Bütçesi : 200-400 Watt
PoE Port Sayısı :
4 Port
4 Port Çalışma Mesafesi : 100Mt.
Montaj Tipi : Wall Mount
Aktarım Port Sayısı : 2
Aktarım Türü : Gbit Fiber


