Ürün arama

Açıklama

1000 PoE Switch

Özellikler

Hardware

Dual IEEE802.3at / 802.3af Power over Ethernet interfaces
Free the wiring for networking system installation, up to 100 meters distance for both power and data transmission
Enables flexible installation of dual PoE Wireless Access Point, Hot-spot Gateway or
Surveillance system.
Pulse Width Modulation (PWM) Protection
Reverse current protection to prevent the current circuits from flowing back to the PV panel
Over-current and Over-temperature protection
Reverse polarity protection (for battery and charging electrodes)
PWM voltage output control at power load

System

Smart Power Management System
Co-working with 300 watts solar PV kit and battery, the BSP-300 empowers the connected
PoE devices in the day time and charging the battery stably.
In the night time, the smart power system monitors and empower the client devices and helps to extend the battery life from charging and discharging.
Easy diagnose of the system operating status via LED indicator
Parameter settings can be remotely configured through the computer
Installation
Integrates with solar PV and battery for easy installation of PoE devices and enabling client devices Plug-and-Play
Battery type options: Nickel-cadmium battery, Lead-acid battery

Teknik Özellikler

Hardware Specifications
Network Connector	3-Port RJ-45 for 10/100/1000Base-T
Network Connector	(2-Port with 802.3at / 802.3af PoE injector function)
Console Port	1 x RS-232 RJ-45 serial port
Power Output	1 x DC out 24@ 2A maximum (two-pin terminal block)
	2 x PoE out 52VDC; max. 30 watts per PoE port
LED	System
	System (Green)
	Fault (Green)
	Per PoE Port (Port 1 / Port 2)
	Link / Active (Green)
	PoE In-Use (Orange)
	LAN Port (Port 3)
	1000 Link / Active (Green)
	10/100 Link / Active (Green)
	Per PoE Interface
	Power LNK/ACT (Green)
	PoE In-Use (Orange)
Power over Ethernet
Standard	IEEE802.3at / IEEE802.3af
Port	Port 1, Port 2
Power Pin	RJ-45 Pin# 1/2 (+); Pin# 3/6 (-); PSE End-span
Power Voltage Injecting	DC 52V
Consumption	30 watts max.; PoE Class 4
Electrical Characteristics
System Voltage Ratings	DC 24V
Maximum Charging Current	15A
Max. Solar Array VOC	DC 60V
Max. Operating Voltage	DC 45V
Total Current Consumption	While operating -32Ma
Total Current Consumption	At idle -11mA
High Temperature Shutdown	100 degrees C disconnect solar and load
High Temperature Shutdown	80 degrees C reconnect solar and load
Overload Capacity	Over 15 Amp will cut off output load
Battery Charging Characteristics
Charge Algorithm	Bulk charge (constant current), absorption charge (constant voltage) and floating charge. Absorption and floating charge with PWM protection.
Maximum Output Current	15A
Nickel-cadmium Battery	± 40 mV/degrees Celsius for NiCad type batteries, charge cut-off @ 55 degrees C
Nickel-cadmium Battery	(Temperature compensation Baseline@ 25 degrees C)
Lead-acid Battery (Default Setting)	± 60 mV/degrees Celsius for lead acid type batteries, charge cut-off @ 55 degrees C
Lead-acid Battery (Default Setting)	(Temperature compensation Baseline@ 25 degrees C)
Float Charge Voltage	DC 27.2V (26.0~30.0V)
Absorption Charge Voltage	DC 29.2V (28.0~32.0V)
LVD (Low Voltage Disconnection)	DC 22.2V (21.0~25.0V)
LVR (Low Voltage Reconnection)	DC 24.8V (23.0~27.0V)
Standards Conformance
Computer Interface	IEEE 802.3 10Base-T
	IEEE 802.3u 10/100Base-TX
	IEEE 802.3ab 10/100/1000Base-T
	IEEE 802.3at / 802.3af for PoE (Power over Ethernet) devices
Regulation Compliance	CE, FCC
System Unit
Operating Temperature	-20 ~ 60 degrees C
Storage Temperature	-40 ~ 90 degrees C
Operating Humidity	20% ~ 80%
Dimensions (W x D x H)	107.2 x 152 x 65.7 mm
Weight	0.79kg
Installation	DIN rail kit and wall mount kit
Software Utility	Device detect / diagnostic, Windows XP / Win 7